Are brake lights and reverse lights the same?

Although these terms are commonly used interchangeably, brake lights and reverse lights are actually not the same. In fact, they have different functions and are different colors. Brake lights are red in color and used to indicate when a car is slowing down or stopping. Conversely, reverse lights are white in color. They are utilized to indicate when a vehicle is backing up/reversing, or preparing to do so.

How can I make my reverse lights brighter?

One way to make your car or truck’s reverse lights shine brighter is to upgrade your current bulbs to an LED model. LED reverse light bulbs shine brighter than factory-grade halogen bulbs, which tend to dull and dim over time, eventually producing a yellowed-out glow that can’t penetrate the darkness like longer-lasting LED bulbs can. If you already have LED bulbs installed and are worried about their functionality, check (or have a professional check them out) to see that they are correctly installed and performing properly.

Can you drive without reverse lights?

Driving without properly functioning reverse lights is not a smart idea—for you as well as others on the road. Although it is not against the law to operate your personal vehicle without reverse lights—as they’re deemed “optional”—failing to do so could easily result in an otherwise avoidable mishap on the road, in a parking lot, etc. Why risk it? To be as responsible as possible, make sure your car or truck has reliable, properly functioning reverse lights.

How do you hook up a reverse light to a backup camera?

It is possible to wire a reverse light to a backup camera. Doing so increases your visibility when driving, thus enhancing your level of safety, as well as the safety of others. First, you’ll need to obtain a backup camera and determine where to mount it. Disconnect your car battery and install the reversing camera. Reconnect the car battery and you should be good to go. Not sure how to complete this task on your own, or not totally confident in your abilities? Take your car to a professional to ensure correct installation.

How do I change a reverse light?

Every vehicle is a little different. Most vehicles have two screws or pull-out rivers that need to be removed. Once those are removed you can pull out the taillight and access the socket. Remove the electrical connector by squeezing the clips and pulling it toward you. Place the entire rear light on a flat, safe surface—do it carefully! Now you’re ready to install the new light in its place. As always, consult with an auto professional with any questions, concerns, or for additional assistance.

7507 PY21 White Canbus LED W/ Built in Resistors No Hyper Flash (PAIR)

SKU:

Availability: Sold Out

7507 PY21 White Canbus LED W/ Built in Resistors No Hyper Flash (PAIR)

Direct replacement bulb for 7507, PY21, BaU15S, T20.
Full metal heatsinking for reliable operation With a built in silent Fan to cool.
Canbus Nonpolar and CK compatible electrical design.
Plug and play, simple installation, no resistors needed.
1200 lumens per bulb.
1 Year Warrant

$54.99 ~~$0.00~~ /

Special Offers

Spend $100+, Get $15 OFF!!!

Code: Fall15

Spend $150+, Get $25 OFF!

Code: FALL30

Select an option to add this to your cart

Color : White

Quantity

Description

Product Description

Best Performance in Industry. Our Ultra Bright 24W 1200LM 7507 PY21 White LED W/ Built in Resistors No Hyper Flashing (2 Pieces) are white colored type LED lights that cover 360 degrees to provide maximum output. Unlike other brands, with resistors on both the filament, we created a CANBUS LED that only has a built-in resistor only on the turn signal filament. Having a resistor on both the filament will lead to melting the housing or the LED falling apart in the housing. We even took it one step future to insure the longevity of the bulbs by adding a cooling fan. The fan only turns on when the high filament is engaged, to reduce heat when resistor is on. Our Design protects the LED from being exposed to constant heat eliminating this issue. This assures no hyper-flashing or error codes. Our LED is designed to replace the factory incandescent bulb without the need to add extra resistors or parts.

Best-In-Class Brightness. Each LED is equipped with 54 SMD LEDs white Colored type LED lights 360 degrees to provide the max output. Each bulbs is 1200Lm, your turn signals will shine a lot brighter than the stock incandescent bulb.

You’ll be hard-pressed to find a brighter, more efficient LED bulb on the market! Designed here in the USA, these bulbs feature an impressive 54 white color LED chip design.

Installation

Difficulty Level: Beginner - Simple Installation for anyone.

Installation time is approximately 10 minutes. There is no need for slicing or complicated wiring. This light is a plug-n-play installation and operation.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Do you have questions about the application, installation, shipping, warranty, or more? Do not hesitate to reach out to Underground Lighting and talk to a specialist. Chat with us online by hitting the chat button or call us at (718) 752-7409. We are here to help!

[tabs][tab title="Warranty"] This products come with a 1 year warranty. [/tab][/tabs]

Warranty

This products come with a 1 year warranty.

FAQs

Frequently Asked Questions on LEDs

Which Color Is Best for Headlight Bulbs?

The best color for your headlight bulbs is white. You want to find a bulb around the range of 6000k in color temperature. The human eye reads this color and brightness better due to its similarity to natural sunlight.

That said, the best color for your headlights can be subjective. LEDs are also available in yellow, blue, and purple. Each color will work just fine on the roads and give your car a more distinctive look than the traditional white color.

Will LED Headlights Damage My Car?

No. LED headlights will not damage your car if properly installed. In addition, you want to purchase the correct LED light that will fit your car. For example, if your vehicle has a CANbus system, you want to buy the right product and install it correctly to avoid any potential issues.

If your car was not originally designed for LED headlights, you can purchase an LED headlight conversion kit. They are safe and will not damage your vehicle as long as you buy top-quality products.

Why Are LED Lights Better?

An LED light bulb saves more energy, produces less heat, and has more light. In addition, it uses 85% less electricity than standard lighting. It is also a lower-cost product but has bright light with a longer life span.

LED light is different from incandescent light. Blue LED combined with yellow phosphor creates white light. The high efficiency of LED light makes it a popular choice.

What Is the Purpose of LED Lights?

LED lights are used as a light source in our homes, devices, and vehicles. LED (light-emitting diode) lights use gallium compounds such as gallium arsenide and aluminum gallium. LED emits light by combining a P-type semiconductor with an N-type semiconductor. Once a voltage is applied, they release energy into light.

What Is the Lifespan of LEDs?

LEDs have a long life span. When an LED is operating at 70% capacity, it has reached the end of its life span.

Incandescent bulbs have around 750 to 2,000 hours of light. In comparison, LED bulbs can have 50,000 to 100,000 hours of light, making them better investments.

Can I Replace Incandescent Bulbs with LED in My Car?

Yes! You can change your initial bulbs to LED in your vehicle. In addition, there are different places where you might want to swap out for LED lights. For example, you can change your headlights, rear license plate lights, interior door entry lights, rear brake lights, and more.

First, however, you need to inspect what type of bulb you need. There are different bulbs with various designs, so you must buy the right one to fit.

Second, different areas of your car may require special tools or specific parts to work properly. Once you have found the products you need, you’re ready to go LED.

To find more questions and answers, please visit our FAQ Page.