Underground Lighting collection of 7507 bulbs, an OEM single-filament signalling bulb defined by the BAU15s bayonet base with 150° offset pins and a single bottom electrical contact. The 7507 format is widely used in turn signals, brake lights, auxiliary lights, and fog lights across many European, Japanese, and domestic vehicles. Because of its unique offset-pin geometry, the 7507 socket is not interchangeable with visually similar bases such as BA15s (1156) or BAY15d (1157), making correct base identification critical for fitment.
The category centres on the 7507 LED replacement bulb, which upgrades the original 21W halogen filament 7507 bulb to a solid-state LED signalling source. The featured products include:
- 7507 PY21 CANbus Amber LED with Built-In Resistors (Pair)
Amber signalling LED engineered for turn signal use, producing high-visibility amber output while integrating load-simulation resistors to prevent hyperflash and bulb-out errors.
- 7507 PY21 CANbus White LED with Built-In Resistors (Pair)
White signalling LED designed for reverse, DRL, or auxiliary signalling applications in clear-lens housings where white output is permitted.
Both bulbs operate on standard 12V automotive electrical systems and install via a twist-and-lock BAU15s bayonet mechanism. Integrated CANbus circuitry replicates the electrical load of a halogen bulb (~21W), preventing BCM-triggered fast blinking or warning messages common with low-draw LEDs. Typical LED power consumption remains ~3–8W, significantly lower than halogen, while maintaining brightness and electrical stability.
7507 LED bulbs are designed for reflector or clear-lens signalling housings, where proper chip placement ensures 360° or wide-angle light distribution similar to the original filament. Colour selection must match the function for road legality:
- Amber 7507 LED: front/rear turn signals
- Red 7507 LED (variant type): brake or rear fog
- White 7507 LED: reverse or DRL only
Compared to halogen 7507 bulbs (~21W, slower filament rise time), LED replacements deliver instant-on illumination, higher luminous efficiency, reduced heat, and longer service life while maintaining OEM socket compatibility. The products in this collection include built-in resistors and CANbus circuitry, designed to mimic halogen load and maintain normal blink rate without requiring external 6-ohm, 50W resistors in many vehicles. However, BCM sensitivity varies by manufacturer.
This 7507 LED category supports OEM halogen replacement, and CANbus-stable LED signalling upgrades through Underground Lighting, emphasizing correct BAU15s fitment, integrated error-free electronics, and signalling visibility.
Upgrade every corner of your vehicle with our complete lighting collections, including HIDs &LEDs. Enhance signalling with Switchback Turn Signal Bulbs, Turn Signal Light Bulbs, and Reverse Lights for maximum road safety.
Need performance upgrades? Browse HID Conversion Kits, HID Bulbs, HID Ballasts, Resistors/Decoders, and HID Lighting Accessories.
Use the Bulb Finder to confirm compatibility and shop for your perfect lighting upgrade today.
