HID Low Beam Headlight for 2016-2019 Ram 1500/2500/3500 (projector)(PAIR)

Low Beam HID Headlight for 2016-2019 Ram – Product Overview and Description

Are you sick of relying on dull, yellow Halogen lights that barely light up the road and give your Ram an outdated and cheap look? If so, you’ll love this innovative, plug-and-play, full Canbus, error and flicker-free HID Kit!

Kit includes: 2 bulbs one for right and for left and 2 Ballast one for right and left!

This simple modification will make your car stand out from the crowd. Just by changing the halogen headlight bulbs and replacing them with our plug-and-play HID kit, you will enjoy better light quality. This upgrade is 3 times brighter than the stock halogen. The kit is available in many colors including cool pure white, whitish blue, blue, and yellow.

What makes our kit better than the rest? 

Our kit is a true 35W kit (whereas other brands state 35W but are really about 26w) designed to work with computers in the car. The CANbus function is high-end with a very fast read and response time to communicate with the car correctly, insuring there will be no error code or flickering issues. Our kit does not use relays or add-ons, it is truly plugged and play.

Why we don't offer 55W kits and why you should not use them.

55w is not much brighter than our true 35W kit. A 55w kit is really pushing about 44-46 watts. So compared to our true 35W, it is not brighter. Instead, it runs hotter which puts stress on the wiring harness and it can cause melting and damage. Not only is our kit more cost-effective than the rest, but it is actually BRIGHTER, too!

How to install this HID Kit?

Start by Removing your grill, Which is 4 screws on top than pull. After that, the headlight is held by 3 screws remove. Under fender you will see a flap go in there. Once you are in there closer to the fender well there is a white push up and down tap. Push it up. Than headlight will be free to pull. Once the headlight is out, the cover has about 6-8 screws remove them to get to the bulb. When installing the hid bulb make a 7/8 inch hole to 1 inch in the cover to run the wires out to the ballast. Use the grommet that comes on the harness to seal.

 Trick/TIP Make the hole off to the side not directly behind the bulb. Once you have the wires ran through the cover put the cover back and connect it to the ballast. Mount  the ballast where you like and put back together. Work on 1 side at a time. Make sure the vehicle is off doors closed and locked when you unplug the headlights.

What Color or Kelvin should I pick? 

Kelvin is the color of the bulb. We recommend 6000k also known as 6k. That is pure white and your brightest option. The Higher the K for example 8000k or 10K the more blue tint the light will have and the less lumens it can put out.